Buttton Programming Index

PanasonicHelp.com

KX-TDA Telephone Feature Programming
The following options are available on KX-TDA systems using the 7600 series and IP telephones. If you are using older model phones, some of the features may not be available to you.

Press Select your option. The highlighted options are the default settings. If you have a display telephone, you can scroll through the options by pressing the softkey under SEL. After making your selection, press OPTION again.

PROGRAM 00 ENTER Display will show your Extension Number and your PBX port and slot number

PROGRAM 01 ENTER Allows you to change your display contrast. Press 1 for light, 2 for darker, 3 darker yet, 4 darkest. ENTER

PROGRAM 04 ENTER Backlight display, press 0 for Automatic (light on only when in use), press 1 for always on, press 2 for always off ENTER

PROGRAM 19 ENTER Line Preference Out. When you pick up the handset or press Sp-Phone do you want your phone to: Do Nothing, press 0, Grab an available idle line, press 1, Go to Intercom, press 3 or grab a specific line or group, press 2 then press a specific line or group button. ENTER

PROGRAM 20 ENTER When an incoming call is ringing at your phone and you pick up the handset, do you want it to answer : no line, press 0, the longest ringing line when multiple calls arrive, press 1 ENTER

PROGRAM 22 ENTER If you have an XDP port on your phone programmed in parallel with your phone and your phone rings, do you want the single-line phone to ring, press 1 or if you do not want it to ring, press 0 ENTER

PROGRAM 23 ENTER You can force handsfree answerback on your phone regardless of the condition of the Auto Answer light. If you press 0 for disable, internal callers to your phone will ring unless you have the Auto Answer light on. If you press 1 for enable all internal callers will come over your speakerphone whether you have the Auto Answer light on or off ENTER

PROGRAM 25 ENTER When a caller is leaving a message in your Panasonic mailbox (and you have previously set call screening) would you like to monitor the message through the telephone speaker? Press 0 for yes, through the speaker or 1 to only hear alarm tone. ENTER

PROGRAM 26 ENTER When you interrupt a Live Call Screening call, would you like the voice mail to keep recording or stop recording? Press 0 to stop recording or press 1 to keep recording. ENTER

PROGRAM 30 ENTER Do you prefer to receive a call waiting signal when you are on an outside call? Press 0 for NO or 1 for YES ENTER

PROGRAM 31 ENTER When you are on a call and someone call you on the intercom, what type of call waiting do you prefer? Press 0 for None, Press 1 for a tone, Press 2 for a voice announcement through the speaker or press 3 for a whisper announcement through the handset. (Selections 2 and 3 not available on all phones.) ENTER

PROGRAM 32 ENTER Which type of call waiting tone do you prefer? Press 0 for tone one or press 1 for tone two. ENTER

PROGRAM 53 ENTER When you forward your phone, you can set a timer from 0 to 120 seconds. If you set it at 0 call will forward immediately. If you set it a 120, your phone will ring for 2 minutes before forwarding. The default time is 15 seconds. Enter the time in seconds you would prefer. We recommend 20 seconds at the most. ENTER

PROGRAM 61 ENTER Handset/Headset operation. With certain headsets, you have the option to set the phone in headset mode. When you want to make or answer a call, press the SP-PHONE button and the call will go through the headset. If you leave the phone in the Handset mode, you will need to pick up the handset to start the call and replace it to hang up. Press 0 for headset off or 1 for headset on. ENTER

PROGRAM 62 ENTER Your system may allow people to barge in on your calls. If you would like to to allow them barging in on you, press 0, if you want to prevent them from barging in on your calls, press 1. ENTER

PROGRAM 63 ENTER To allow paging announcements over your phone, press 0. To disallow paging announcements over your phone, press 1. ENTER

PROGRAM 65 ENTER To disallow background music through your telephone speaker while the phone is hung up, press 0. To allow, press 1. ENTER

Press	Select your option. The highlighted options are the default settings. If you have a display telephone, you can scroll through the options by pressing the softkey under SEL. After making your selection, press OPTION again.
PROGRAM 00 ENTER	Display will show your Extension Number and your PBX port and slot number
PROGRAM 01 ENTER	Allows you to change your display contrast. Press 1 for light, 2 for darker, 3 darker yet, 4 darkest.	ENTER
PROGRAM 04 ENTER	Backlight display, press 0 for Automatic (light on only when in use), press 1 for always on, press 2 for always off	ENTER
PROGRAM 19 ENTER	Line Preference Out. When you pick up the handset or press Sp-Phone do you want your phone to: Do Nothing, press 0, Grab an available idle line, press 1, Go to Intercom, press 3 or grab a specific line or group, press 2 then press a specific line or group button.	ENTER
PROGRAM 20 ENTER	When an incoming call is ringing at your phone and you pick up the handset, do you want it to answer : no line, press 0, the longest ringing line when multiple calls arrive, press 1	ENTER
PROGRAM 22 ENTER	If you have an XDP port on your phone programmed in parallel with your phone and your phone rings, do you want the single-line phone to ring, press 1 or if you do not want it to ring, press 0	ENTER
PROGRAM 23 ENTER	You can force handsfree answerback on your phone regardless of the condition of the Auto Answer light. If you press 0 for disable, internal callers to your phone will ring unless you have the Auto Answer light on. If you press 1 for enable all internal callers will come over your speakerphone whether you have the Auto Answer light on or off	ENTER
PROGRAM 25 ENTER	When a caller is leaving a message in your Panasonic mailbox (and you have previously set call screening) would you like to monitor the message through the telephone speaker? Press 0 for yes, through the speaker or 1 to only hear alarm tone.	ENTER
PROGRAM 26 ENTER	When you interrupt a Live Call Screening call, would you like the voice mail to keep recording or stop recording? Press 0 to stop recording or press 1 to keep recording.	ENTER
PROGRAM 30 ENTER	Do you prefer to receive a call waiting signal when you are on an outside call? Press 0 for NO or 1 for YES	ENTER
PROGRAM 31 ENTER	When you are on a call and someone call you on the intercom, what type of call waiting do you prefer? Press 0 for None, Press 1 for a tone, Press 2 for a voice announcement through the speaker or press 3 for a whisper announcement through the handset. (Selections 2 and 3 not available on all phones.)	ENTER
PROGRAM 32 ENTER	Which type of call waiting tone do you prefer? Press 0 for tone one or press 1 for tone two.	ENTER
PROGRAM 53 ENTER	When you forward your phone, you can set a timer from 0 to 120 seconds. If you set it at 0 call will forward immediately. If you set it a 120, your phone will ring for 2 minutes before forwarding. The default time is 15 seconds. Enter the time in seconds you would prefer. We recommend 20 seconds at the most.	ENTER
PROGRAM 61 ENTER	Handset/Headset operation. With certain headsets, you have the option to set the phone in headset mode. When you want to make or answer a call, press the SP-PHONE button and the call will go through the headset. If you leave the phone in the Handset mode, you will need to pick up the handset to start the call and replace it to hang up. Press 0 for headset off or 1 for headset on.	ENTER
PROGRAM 62 ENTER	Your system may allow people to barge in on your calls. If you would like to to allow them barging in on you, press 0, if you want to prevent them from barging in on your calls, press 1.	ENTER
PROGRAM 63 ENTER	To allow paging announcements over your phone, press 0. To disallow paging announcements over your phone, press 1.	ENTER
PROGRAM 65 ENTER	To disallow background music through your telephone speaker while the phone is hung up, press 0. To allow, press 1.	ENTER