|
Name Change KX-TA 308 KX-TA 624 KX-TA 824 |
|
|
In order to change names, it is necessary to know the JACK number of the station. If you do not know the jack number, go to the station. With a display phone, move memory switch to PROGRAM or press PROGRAM, press 6 and the JACK number will be displayed. Ten Characters Max. Example below is for the phone located at Jack 07 Station 121. Name to be entered is Bob |
|
|
KEYSTROKES |
DISPLAY READS |
|
Move Memory Switch to PROGRAM
* # 1234 (or * # password if changed) |
SYS PROGRAM NO > |
| Dial 604 | EXTENSION NAME |
| Press the SP-PHONE key | Jack No? > |
| Dial 07 (because this is jack 7) | 07 Not stored (or present name) |
| Dial 2 (for the B in Bob) | Display will read 2 |
| Press the AUTO ANSWER Key until |
B |
|
Press 6 (for the o in Bob) |
Display will read B2 |
|
Press the AUTO ANSWER Key until |
Bo |
| Dial 2 (for the b in Bob) | Display will read Bo2 |
|
Press the AUTO ANSWER Key until |
Bob |
|
Press STORE to save |
|
|
To program another jack, press SP-PHONE for NEXT, REDIAL for PREVIOUS or AUTO ANSWER and enter the desired jack number to go to a specific jack. Press STORE. Lift handset and hang up to end programming. Press TRANSFER, STORE to clear a name. Press 1 for Q Z ! Shift for q z ? Press SHIFT soft key to change from upper case to lower case |
|
|
Return Memory switch to SET when you have changed all names. |
|
| Additional characters that can be programmed in a station name | |||||||
| Press 1 | ! | ? | " | 1 | |||
| Press * | ? | + | - | + | < | > | * |
| Press # | $ | % | & | @ | ( | ) | # |
| Press 0 | (Space) | . | ' | : | ; | 0 | |