Station Speed Dial - KX-TD System, all phones
To use Station Speed Dial
Press Intercom, Dial 3 STAR
Dial speed dial code (any number from 0 to 9 on the dial pad)
To Store Station Speed Dial
Press Intercom 30,
Dial speed dial code (any number from 0 to 9 on the dial pad)
Enter 9 and the number as you would normally dial
Press POUND
Hang Up
SAMPLE: To program 1858 555 1212 in Dial Speed Code 3 you would do the
following, press INTERCOM 30, 3, 9, 18585551212, POUND, Hang Up. To later call this
person, press INTERCOM 3 STAR 3 and the number would be called. Remember, you
have 10 positions to program, 0 to 9. STAR means *
POUND means #
If you have programmed your phone to preferred
line access to an outside line when you pick up the handset, you must press
intercom before dialing the station speed dial. Single-line phones are
always in intercom mode when the handset is picked up.
Station Speed Dial is a feature on KX-TD digital systems that allows you to have up to 10 speed
dial numbers stored at your extension. These numbers are not on buttons
and require you to use a 3 digit code to access each number. The chart
above shows how to enter 858-555-1212 and then dial the number by dialing 3*3.
When storing, remember to dial 9 or another line
access code for an outside line and to press # after you have
entered the number. If you have a
7400 series display phone click here.
All features the same on single-line devices.