Station Speed Dial, 76XX Series Display Phones - KX-TDA System
How do I program and use STATION speed dial on my 76XX display phone?
Station Speed Dial is a feature on the digital systems that allows you to have up to 10 speed dial numbers stored at your extension. These numbers are not on buttons and require you to use your display or a 3 digit code to call each number. The chart below shows how to use the display and jog wheel to call the number. When storing, remember to dial 9 or another line access code for an outside line.
|
Station Speed Dial Number Storage (For Display phones) |
With the handset down/speaker phone off PROGRAM, AUTO DIAL LOCATION NO> Enter 00 to 99 or press up or down arrow on navigator wheel until you get to the desired location. Dial 9 and the number as you would normally dial. You may use a line access code instead of 9. Press ENTER Enter the name (see panel to right) |
To Enter Names Press the number on the dial pad that is closet to the letter, such as 5 for L or 9 for W. Example, for K, press 5, two times. For lower case k press 5, five times. When the correct character is entered, go to the next number/letter etc.. If you need to move the cursor right to enter the same letter again, press the right arrow on the navigator wheel, also for a space between characters. 20 characters max. Press AUTO DIAL/STORE or ENTER when all characters are entered.
|
|
Using Station Speed Dialing |
Press MENU, ENTER or press the Navigator Wheel RIGHT arrow. Press the letter of the person you want to find such as 33 for Edward or press DOWN arrow to scroll through all names. Press the navigator wheel DOWN arrow. When the arrow is on the person you want to call, press speakerphone or lift the handset. When you are at the intended name on the large screen display phone, press VIEW or ENTER to see additional information about the entry. |
|